Everything about Electron Multiplier totally explained
An
electron multiplier (continuous dynode electron multiplier) is a vacuum-tube structure that multiplies incident charges. In a process called
secondary emission, a single
electron can, when bombarded on metal (or PbO coated surface) induce emission of roughly 1 to 3
electrons. If an
electric potential is applied between this metal plate and yet another, the emitted electrons will accelerate to the next metal plate and induce
secondary emission of still more electrons. This can be repeated a number of times, resulting in a large shower of electrons all collected by a metal anode, all having been triggered by just one. Therefore, another name for electron multipliers is
avalanching ion detector. 12 stages of acceleration will usually give a gain in
current of 10 million.
Operation
The avalanche can be triggered by any charged particle hitting the starting electrode with sufficient energy to cause secondary emission. Hence the electron multiplier is often used as an ion detector. It could also be triggered by a photon causing vacuum photoemission of at least one electron. In a
photomultiplier tube, a photo-emissive surface is followed by an electron multiplier with several sequential multiplying electrodes called dynodes. Because these electrodes are separate from each other, this might be called a "discrete-dynode" multiplier. A voltage divider chain of resistors is usually used to place each dynode at a potential 100-200v more positive than the previous one.
A "continuous-dynode" structure is feasible if the material of the electrodes has a high resistance, so that the functions of secondary-emission and voltage-division are merged. This is often built as a funnel of glass coated inside with a thin film of semi-conducting material, with negative high voltage applied at the wider input end, and positive voltage near ground applied at the narrower output end. Electrons emitted at any point are accelerated a modest distance down the funnel before impacting the surface, perhaps on the opposite side of the funnel. At the destination end a separate electrode (anode) remains necessary to collect the multiplied electrons. This structure is also known as (single) channel electron multiplier (CEM), and one of the most common is sold under the trade name Channeltron.
Another geometry of continuous-dynode electron mulitplier is called the
microchannel plate. It may be considered a 2-dimensional parallel array
of very small continuous-dynode electron mulitpliers, built together and powered in parallel too. Each microchannel is generally parallel-walled, not tapered or funnel-like.
Applications
In
mass spectrometry electron multipliers are often used as a detector of ions that have been separated by a mass analyzer of some sort. They are typically of the continuous-dynode type, and may have a curved horn-like funnel shape.
Further Information
Get more info on 'Electron Multiplier'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://electron_multiplier.totallyexplained.com">Electron multiplier Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
